Verify the water provider, PWSID, source, ZIP coverage and current reports before comparing whole-house filtration, water softeners, reverse osmosis, professional installation or financing in Bloomington.
The primary research starting point is City of Bloomington Utilities with public-water-system ID IN5253002. The source starting point is Monroe Reservoir. The 2025 report says four UCMR sampling rounds in 2023-2024 had no detections among the monitored UCMR contaminants; confirm against the newest report.
What this means: the city name and ZIP code organize the search, but the current bill, serving utility, PWSID, newest report and property-specific test determine which evidence applies.
The 2025 report says four UCMR sampling rounds in 2023-2024 had no detections among the monitored UCMR contaminants; confirm against the newest report.
Save the current water bill, the newest report for City of Bloomington Utilities, any utility notices, and the exact service-line or private-well information for the property. The research source profile is surface water—Monroe Reservoir—but that profile must still be confirmed for the service address.
Record whether scale, staining, odor, taste, sediment, or pressure changes occur at one fixture or throughout the building, and whether the condition appears on hot water, cold water, or both. Those observations can guide testing, but they do not identify a contaminant or replace a certified laboratory result.
City-level information becomes actionable only after it is connected to the serving system or private well. These Bloomington examples show the workflow.
Do not borrow the public-system contaminant table for a private well. Document the well, treatment equipment, service history and plumbing, then use a certified laboratory panel selected for the actual source and concern.
An address using ZIP codes 47401, 47403, 47404, and 47405 may still sit near a utility boundary, purchased-water zone or private-well area. The postal code organizes mail; it does not prove that City of Bloomington Utilities supplies the property.
When the current bill identifies City of Bloomington Utilities and PWSID IN5253002, use that exact system to locate the newest report. Compare the source description—Monroe Reservoir—with the report before carrying any value into a treatment decision.
Even when the public-system report is correct, service lines, premise plumbing, water heaters and vacant-building conditions can create address-level questions. Separate system compliance from what a sample at the building can establish.
Local research context: Monroe County and the Bloomington and South-Central Indiana market contain more than one kind of water arrangement. A nearby city's report should not be transferred to Bloomington without matching the system.
Current city note: The 2025 report says four UCMR sampling rounds in 2023-2024 had no detections among the monitored UCMR contaminants; confirm against the newest report.
Use the Bloomington ZIP list to begin the lookup, then verify the provider on the bill. ZIPs can cross municipal, county and utility boundaries and may include apartments, purchased-water areas or private wells.
| ZIP code | Postal use | Utility starting point | PWSID | Source profile | Static research links |
|---|---|---|---|---|---|
| 47401 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47403 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47404 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47405 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47406 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47408 | Standard street delivery | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47402 | PO BoxUse the property’s street-address ZIP for utility matching. | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water | |
| 47407 | PO BoxUse the property’s street-address ZIP for utility matching. | City of Bloomington UtilitiesPossible provider only; verify on the current bill. | IN5253002 | Surface water |
Publication status: The links above are fixed outbound URLs suitable for static HTML as of September 13, 2026. The information displayed at EWG is maintained dynamically and can change. IndianaWaterFiltration.com does not copy or host EWG’s contaminant tables and is not affiliated with or endorsed by EWG.
USPS ZIP Code Lookup · Why ZIP codes may not match city boundaries · Indiana public-water-system resources · How to read EWG data
The most defensible local starting point for Bloomington combines the bill, the public-system identifier, and the source description. This page currently maps that work to City of Bloomington Utilities and Monroe Reservoir.
Surface-water treatment places added emphasis on treatment-plant processes, seasonal source conditions, disinfectant residual, disinfection byproducts, taste and odor, and distribution-system context. A current report is more useful than a generic statewide average.
Treatment goals should be separated: whole-house carbon may address one set of concerns, softening another, and a certified point-of-use system another. No single technology should be assumed to solve every reported issue.
A source classification does not prove that a named contaminant is present, absent, above a standard, or responsible for a household symptom. Use it to select the correct records, sampling plan, and treatment questions.
A Consumer Confidence Report describes a public water system; it is not a sample from every building. These sources and checkpoints make the page verifiable without pretending that one citywide value applies to every address.
Use this source to confirm the system identity, report year, source profile, monitoring context, or independent comparison before applying the information to an address.
Open source →Use this source to confirm the system identity, report year, source profile, monitoring context, or independent comparison before applying the information to an address.
Open source →Confirm City of Bloomington Utilities on the current bill and match the PWSID before using a utility-wide report.
Verify whether the current report still describes Monroe Reservoir and note any plant, wellfield, or purchased-water distinctions.
Separate system-level reporting from service-line, premise-plumbing, appliance, and private-well questions that may require property-specific testing.
EWG's Tap Water Database publishes third-party, utility-level summaries of contaminants reported for community water systems. EWG's current methodology primarily uses regulated-contaminant data from 2021–2023, selected UCMR monitoring from earlier cycles, and PFAS UCMR 5 data available through 2024. It is not a sample from this home, and it does not cover private wells.
The current city inventory points to City of Bloomington Utilities and PWSID IN5253002 as the research starting point. Match both identifiers before comparing EWG's third-party summary with the newest utility report.
Search for IN5253002 in EPA's UCMR 5 data and compare the system, sampling date, compound, unit, reporting limit, source type, and result with the newest utility report. Bloomington geography alone does not establish a household exposure.
A reported result can be historical, plant-specific, system-wide, raw-water, finished-water, or below a reporting limit. A “non-detect” means the laboratory did not report the compound above the method's reporting threshold in that sample; it is not a permanent guarantee for every tap.
Search EPA UCMR 5 data · Read the Indiana PFAS treatment guide · Review the ZeroTrace PFAS resource
Use a sequence that protects against both under-treatment and unnecessary equipment: verify, test, match, engineer, compare and maintain.
Confirm the bill, provider, PWSID, source, newest report and whether the property uses public water or a private well. Disinfectant, disinfection byproducts, seasonal taste and odor, source changes, and distribution context are logical report sections to review before selecting media or capacity.
Use the utility report for system context and a certified laboratory when the unresolved question is property-specific, health-related, or outside the report's scope.
Match the treatment stage to the result: softening for verified hardness goals, carbon for specific taste/disinfectant goals, oxidation/filtration for tested iron or sulfur conditions, and certified point-of-use treatment for named drinking-water reductions.
Check peak flow, pressure, plumbing, drain access, bypass arrangement, electrical needs, pretreatment, replacement intervals, and maintenance ownership before installation.
Read the certification and complete system claim for the exact model. Do not transfer a claim from one component to an assembled system without evidence.
Review professional installation, ongoing service, and financing together so the selected system can be operated and maintained as intended.
These answers summarize the visible research limits and next steps on this page.
The research starting point is City of Bloomington Utilities, but city and ZIP boundaries do not prove the serving utility. Check the current bill and verify PWSID IN5253002 before relying on a system-wide report.
The current research profile is Surface water: Monroe Reservoir. Confirm the newest utility report because sources, treatment operations, and purchased-water relationships can change.
No. A utility report, EWG page, IDEM record, or UCMR result is not a sample from every property. Review the system, date, sample type, unit, reporting limit, and address relevance before drawing a conclusion.
Start with the verified supplier or private-well test, define the goal, and compare the complete system claim—not only one cartridge or component. Flow, pressure, installation, bypass, drainage, replacement intervals, and maintenance all affect the result.
The regional site can route a water-review request to Zero Trace Water for availability, system selection, professional installation, and financing review. Financing is subject to third-party approval, terms, and availability, and submission does not guarantee service in every location.
Use the professional installation guide, financing guide, and ZeroTrace certification checklist.
Claims are tied to the serving-system research starting point, official state and federal records, utility reporting where available, and clearly labeled independent comparison links. Verify the newest report for the address before relying on a historical value.
Editorial record: Prepared by the Zero Trace Water Research Team. Published 2026-09-09; reviewed September 13, 2026. See the research standards, corrections policy, and local evidence summary. This page does not diagnose health effects, interpret an individual's exposure, or promise that an unspecified system will reduce a contaminant.
Confirm the supplier or well, collect the right evidence, compare complete treatment claims, and review installation and financing before buying.
